Analogis 6086 Brush 2 - cepillo para LP karbonový a samet

Flat LP record cleaning brush with carbon fibre, velvet coating and anti-static effect

With this anti-static brush you can gently, quickly and effectively clean dust and dirt from your precious vinyl records. The carbon fibers are conductive and fine enough to penetrate deep into the grooves to get rid of most dirt, and the velvety coating traps even the finest particles. The conductivity of the thousands of fibers also helps discharge static charge, eliminating cracking during playback. The soft velvet surface cleans grooves deeply and with the utmost gentleness.

Regular cleaning of the record grooves delivers a better sound experience while extending the life of the cartridge tip and record.

CLEANING PROCEDURE

1) Place the phono record on the turntable and turn on the turntable rotation and remove the metal cover from the brush.

2) Hold the brush horizontally with the record by the aluminum handle and gently press the brush against the grooves of the record. (Be careful not to let the grooves touch the metal part of the handle.)

(For increased effectiveness, we recommend lightly dampening the brush fibers with Analogis STATIC CLEANER 6075 cleaning and anti-static solution before placing them on the record.)

3) While rotating the brush, slowly pull the brush towards you, trying to pick up any dirt (see picture above). Allow the turntable to spin once or twice until all dust and dirt is captured by the brush bristles.

4) Repeat the above procedure before playing each side of the phonograph record, removing any trapped dirt from the brush between cleanings.

Remark:

Do not touch the carbon fiber bristles or subject them to undue pressure, tension or bending.