Pro-Ject Brush It

High quality brush for cleaning LP records with carbon fibre and anti-static effect

With this anti-static brush you can gently, quickly and effectively clean dust and dirt from your precious vinyl records. The carbon fibers are conductive and fine enough to penetrate deep into the grooves and rid them of most dirt that would otherwise get caught on the tip of the transfer.The conductivity of thousands of fibers also helps discharge static charge, eliminating cracking during playback. Regular cleaning of the record grooves delivers a better sound experience while extending the life of the stylus and the record.

CLEANING PROCEDURE

1) Place the phono record on the turntable and turn on the turntable rotation.

2) Hold the brush horizontally with the record by the aluminum handle and gently press the bristles of the brush against the grooves of the record. (Be careful that only the carbon fibers of the brush touch the grooves.)

3) While turning, slowly pull the brush towards you, trying to catch any dirt (see picture above). Allow the turntable to spin once or twice until all dust and dirt is captured by the brush bristles.

4) Repeat the above procedure before playing each side of the record, and between cleanings, remove the brush from thebrush by rotating the plastic brush cover around the bristles one or more times.

Remark:

Do not touch the carbon fiber bristles or subject them to undue pressure, tension or bending.